X-Sauce M-0 Tubeless Tire Repair Kit

001000095
  • Reduced price

TUBELESS MECHANICAL REPAIR KIT FOR TIRES M-0

NEW KIT OF WICKES TO REPAIR TUBELESS COVERS!

Kit for repairing holes or slits in the tubeless tire when the anti-puncture liquid can not clog due to the size of the hole or cut.

A kit specially designed for pinching on the sidewall of the tire, where the wall of the tire is particularly thin and wicks and very small and precise tools are required.

The kit comes in a pocket-sized plastic box and contains:

Tool for wicks of 1.5mm, 10 wicks of 1.5mm, cutter and glue.

BUY

Price: €6.2521% taxes included
Recommended price: €7.49
Te ahorras €1.24
Loading

Title where you found it

text where you found it

I accept the Privacy Policy

INSTRUCTIONS FOR USE OF THE TUBELESS COVER REPAIR KITS

 

 1.- Before inserting the wick, we must dry the tire any possible sealant liquid that comes out of the area of ​​the puncture.

 2.- Place the wick in your tool introducing it through the hole in it. Add some adhesive to the wick to guarantee a better adherence to the tire.

 3.- Insert the wick in the tire through the hole of the puncture without getting to introduce it whole, leaving at least 1cm of wick. Do it carefully so as not to touch the rim bottom with the tool, to avoid damaging it. (It is easier to insert the wick if you keep the tire under pressure, even if it is covering the cut with one finger until the moment you insert the wick).

 4.- Finally, we will pull the tool out. The tool will come out, releasing the wick that will be stuck in the hole of the puncture. The rest of the wick that was left out of the tire can be cut with the cutter, but never flush with the tire, always leaving 4 or 5mm of wick on the outside.

Data sheet

Use
All